iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

Filling system for viscous products

Source:Ringier Food Release Date:2018-09-27 332
Food & Beverage
Add to Favorites
Krones introduces a new a flexible filling system that precisely bottles any highly viscous product even at high output ranges.  

A NEW generation of filling valves allows more precise bottling of such products as oils, dressings, condiment, and table sauces - even in the high output range of up to 48,000 containers per hour. Krones has equipped the Modulfill NWJ filler to handle highly viscous products. The filler uses weighing cells to determine the precise fill quantity, irrespective of the product’s characteristics. It features a filling valve developed specifically for sauces, flexible enough to cope with a huge array of disparate products.

Krones design-enhances its sauce filling capabilities so as to replace the traditional piston- or level-controlled filling by a better and more accurate alternative. It has developed processes with weight filling in free-jet mode featuring a lowerable filling valve. According to the company, the Modulfill NWJ can be justly described as a breakthrough – not least because of its new valve system and the Viscosity-Based Fine Pressure Control.

Krones Modulfill NWJ filler for highly viscous products

Products safely cold-filled

There are several reasons why viscous products can now also be cold-filled cleanly, safely and hygienically:

  1. The product is stored in the co-rotating central bowl, in which the pressure is continuously monitored. Using the newly developed Viscosity-Based Fine Pressure Control, nitrogen or sterile air is injected, depending on the product concerned, in order to maintain at a constant level the predefined pressure conditions in both the product tank and in the filling valve. Thanks to this continuous control, optimum filling accuracies are achieved – even with fluctuating product characteristics featuring different viscosities.
  2. A product’s viscosity does not usually remain constant while a product batch is being filled, which in the case of conventional filling processes leads to under- or overfills. Not with Krones’ so-far-unique process: in addition to measurements using a weighing cell, the Krones filler accordingly takes time measurements as well. If predefined limits are violated upwards or downwards, the Viscosity-Based Fine Pressure Control will re-adjust the filling pressure and thus the flow velocity as well.
  3. For optimum, clean and hygienic filling of products containing chunky particles, the initial product insertion is kept as small as possible, and maximally close to the filling valve. This simultaneously reduces product losses, too.
  4. The electronic weighing cells enable the fill quantity to be determined with great precision. The system thus achieves optimum filling accuracies – with every product, irrespective of its conductivity or degree of viscosity.
  5. The filling valve itself comprises a valve housing and an internal valve stem. When the bottle is being filled, the valve unit descends to just above the container’s mouth. At the same time, the internal valve stem, which is responsible for opening and closing the valve, can be separately actuated, thus varying the closing speed. Depending on the product involved, then, the valve stem’s filling and closing speeds are optimally matched to the characteristics of the product concerned, assuring maximised flexibility.
  6. Viscous products tend towards thread-formation or post-dripping. This results in soiled containers, unnecessary product losses, and entrainment of product residues along the entire line. The solution has arrived in the shape of the Modulfill NWJ-Neck – featuring a valve geometry designed specifically for clean filling: a concave chamfer prevents elongated-drip formation and at the same time ensures a sharp cutting edge.

Hygienic design

The Modulfill NWJ meets the most stringent of hygiene requirements: by means of fully automated CIP and SIP processes, plus an optional version featuring an automatic foam cleaning system or bottle and closure handling. For the closed-cycle CIP cleaning routine, the cups slot into place automatically; the CIP and sterilisation media are returned downwards. The tanks are sprayed out automatically as well.

As a stand-alone machine or a block solution

The Modulfill NWJ is suitable for:

• hot and cold-filling of table and condiment sauces

• low-viscosity products from approximately 100 millipascal-seconds (olive oil, salad dressings)

• highly viscous products with a rheological yield point (mayonnaise or mustard) up to approximately 15,000 millipascal-seconds

• Products with separable particles up to a size of 6 x 6 x 10 millimetres – depending on the dimensions and particle consistency involved – with a content of up to 20 per cent (BBQ sauces with large chunks) or 75 per cent (whole-grain mustard, harissa, etc.)

• glass and plastic containers in base-handling and PET containers in neck-handling mode

In terms of layouting, the filler can be customised to suit the needs of the client concerned and the space available: the Modulfill can be supplied as a stand-alone machine, in conjunction with a closer and as a block solution with a rinser or a blow-moulder.

There are options for combining the blow-moulder/filler block with a ProShape module for producing oval and other special-shaped bottles, or with a Contipure preform sterilisation module using H2O2 to produce containers for sensitive products.

                               Avoiding traditional filling problems

   The new system has been developed specifically for eliminating tradition filling problems:

  • Simple, flexible adjustment of the flow velocity and the increased shear force acting on the product to avoid what is called folding, e.g. in the case of mayonnaise, unwanted air inclusions.
  • Bubble entrainment with low-viscosity sauces, like ketchup, is correspondingly optimised by a reduced flow velocity.
  • The valuable discharge geometry of the valve stem reduces both elongated-drip formation at the discharge and thread formation or post-dripping, and ensures clean filling without soiled neck finished.
  • Temperature- or batch-entailed inaccuracies in the filling process due to what are sometimes substantial fluctuations in the product’s viscosity are very largely smoothed out by the intelligent Viscosity-Based Fine Filling Pressure Control feature.

 

Nike Zoom Live 2017
Add to Favorites
You May Like