ise-view-Article Detail Bottom List

OPEN MIND presents latest hyperMIL

Source:Ringier Metalworking

Date Published:4/11/2017 08:04:56 PM

OPEN MIND has developed a special method for highly efficient finishing of steep and flat surfaces: 5-axis tangent plane machining with conical barrel cutters.
5-axis tangent machining | CIMT 2017 Beijing
hyperMILL® MAXX Machining: 5-axis tangent machining for all continuous faces
 
5-axis tangent plane machining | CIMT 2017 Beijing
5axis tangent plane machining cuts machining time by up to 90 per cent
 
OPEN MIND Technologies AG, a developer of CAM/CAD-Software, will showcase the latest version of the hyperMILL® at CIMT, one of the four largest international machine tool exhibitions in the world (China International Exhibition Center, Beijing, 17 - 22 April 2017). In Hall 8 of the German pavilion, the CAM specialists will demonstrate how to fully take advantage of NC machines.
 
hyperMILL® is a modular complete CAM solution for 2.5D, 3D and 5-axis milling and machining operations such as high-speed cutting (HSC) and high-performance cutting (HPC). Thanks to powerful CAM strategies, NC programs can be quickly and easily generated, even for complex components. Since all strategies are integrated in one interface, all milling and mill turning operations can be created with just one CAM software application. This enables integrated processes and machining time reductions, while also increasing reliability – for maximum process reliability, cost-effectiveness and quality. Manufacturing companies can maintain and increase their competitiveness with the innovative hyperMILL® CAM system.
 
Power times three
The latest hyperMILL® release once again includes numerous powerful strategies that enable users to increase their productivity even further – with the same or even better workpiece quality. The hyperMILL® MAXX Machining performance package includes special power strategies designed to boost performance in roughing, finishing and drilling.
 
Time savings of up to 90 percent
OPEN MIND has developed a special method for highly efficient finishing of steep and flat surfaces: 5-axis tangent plane machining with conical barrel cutters. In practice, this method of machining results in time savings of 90 per cent and more.
 
The finishing module with the 5-axis tangential machining strategy represents yet another high-performance solution for machining all continuous faces. This strategy also uses the conical barrel cutter with its special geometry. This tool was developed by OPEN MIND and features exceptionally large radii. These enable milling with large path distances with the same theoretical scallop height. The result: high-quality surfaces with extremely short machining times and increased tool life.
 
Even faster roughing and drilling
Both the roughing and drilling modules also offer equally high optimization potential. When using HPC machining with trochoidal tool movements, time savings can be 20 to 70 per cent greater than before.
 

5-axis tangent plane machining | CIMT 2017 Beijing

Comment

Not interesting to Very interesting
Image CAPTCHA
Enter the characters shown in the image.
 

We use cookies on this site to enhance your user experience. By clicking any link on this page you are giving your consent for us to set cookies.