iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

Optimising the properties of reinforced compounds

Source:International Plastics News for Release Date:2018-02-08 569
Plastics & Rubber
Add to Favorites
THERMOCOMP AM from SABIC consist of eight compounds, developed for use in large-format pellet-fed extruders and ideal for tooling, aerospace, automotive and defense applications.
A family of high-performance additive compounds was introduced by SABIC to address the unique requirements of large format additive manufacturing. THERMOCOMP™ AM consist of eight compounds, developed for use in large-format pellet-fed extruders.  Because they are reinforced with carbon or glass fibres for added strength, THERMOCOMP AM compounds can be used for demanding applications in the tooling, aerospace, automotive and defense industries.
 
“Large format additive manufacturing is opening up tremendous new opportunities for producing large, complex parts with speed and precision,” according to Stephanie Gathman, director, Emerging Applications, SABIC. “We are committed to providing the advanced material solutions customers need to win. Beyond innovative material development, SABIC also supports customers with world-class processing, design and testing capabilities at our U.S. Center of Excellence for Additive Manufacturing in Pittsfield, Massachusetts. These resources help customers accelerate application development for large printed parts.”
 
Combining the strengths of various resins
SABIC’s first eight reinforced THERMOCOMP™ AM compounds for large format additive manufacturing are based on four of the company’s amorphous resins: acrylonitrile-butadiene-styrene (ABS), polyphenylene ether (PPE), polycarbonate (PC) and polyetherimide (PEI). These resins exhibit good creep behavior versus semi-crystalline resins, and reduced deformation under constant pressure. Further, these materials exhibit lower shrinkage during cooling, which means greater dimensional stability and less thermal expansion during part use.
 
The ABS-based compounds provide ease of processing, low warpage and good print surface quality, making them good candidate materials for a broad range of applications and tooling, including thermoforming and vacuum forming. The PPE-based compounds offer lower thermal expansion, outstanding hydrolytic stability, a higher strength-to-weight ratio and higher temperature performance compared to ABS. The PC-based compounds deliver higher stiffness, higher temperature performance and higher throughput compared to ABS and PPE, as well as excellent ductility and a smooth surface finish. The PEI-based compounds, developed from SABIC’s inherently flame-retardant ULTEM™ resins, provide low thermal expansion, high temperature performance, an excellent strength-to-weight ratio, high modulus and low creep. Each of the THERMOCOMP AM materials is reinforced with carbon or glass fibre, depending on the degree of stiffness and dimensional stability required.
 
In the past edition of  Formnext,  SABIC presented a section of a yacht hull from Livrea Yacht that was printed on the company’s BAAM machine in its Center of Excellence for Additive Manufacturing in Pittsfield. The hull is a result of a collaborative design effort between SABIC, Livrea Yacht and 3D design and engineering software provider, Autodesk. Using Autodesk® Fusion 360® design software and SABIC’s processing expertise on the BAAM equipment, the three companies selected two materials from the THERMOCOMP™ AM portfolio: a carbon fiber-reinforced PPE compound for the hull’s outer layer, and a carbon fiber-reinforced PEI for the inner lattice support structure. 
 
“The process of using large-format additive manufacturing enabled Livrea Yacht to eliminate the need for moulds and prototyping, which can be costly and inefficient,” said Mike Geyer, director of Evangelism and Emerging Technology at Autodesk. “The 3D printed hull is lighter and stronger, and can be manufactured at a fraction of the cost and in half the time, giving Livrea Yacht a competitive breakthrough that would not be possible with traditional fabrication. We are entering a very exciting time for complex, high-speed additive manufacturing.”
 
Two materials from SABIC’s new THERMOCOMP™ AM portfolio were selected for a yacht hull from Livrea Yachts – a carbon fibre-reinforced PPE compound for the hull’s outer layer, and carbon fibre-reinforced PEI for the inner lattice support structure. The hull, printed on SABIC’s BAAM® printer in Pittsfield, Massachusetts in the United States, is a result of a collaborative design effort between SABIC, Livrea Yacht and 3D design and engineering software provider, Autodesk. The final part is lighter and stronger versus hulls made by traditional fabrication, and can be manufactured at a fraction of the cost and in half the time.
Adidas Puma Shoes
Add to Favorites
You May Like