1. Acarving / tapping drilling center. Rigid tapping up to M10. Machining material: aluminum, iron and wood materials. 2. Control Panel: Equipped with INTEK featuring high speed and high precision and achieve the highest speed machining accuracy. Movable control box allows for work piece clamping in the machining range for saving operation time. 3. Chips Conveyor Belt: Suitable for collecting waste materials and keeping the machine clean. Product Features 1: X-axle working length is available in three specifications of 3000 / 4500 / 6500mm and custom-made orders are also acceptable. 2: Use precision high-speed Spindles to provide higher stability, longer life and longer working time. 3: Movable column type is used to achieve the maximum working range with the smallest mechanical measurement. 4: Precision ball linear rail is mounted on three axles to enhance the accuracy and stability during working. 5: Precision-grade gear unit/gears are used for X-axle presetting, which can be replaced with Ball Stud to enhance the precision level of the work piece. 6: Clamp-arm Cutter Magazine is used for changing the cutter above the working area to improve the working speed and increase the parts production. 7: The Operation Box is designed in a movable manner to achieve easier parts calibration and speedier operation. 8: Three axles are calibrated by laser to guarantee that the mechanical accuracy shall be within the required tolerance at all times.