Gosourcing Product List

Products

A-PACK「In Mold Labeling Turnkey Solution」

A-PACK「In Mold Labeling Turnkey Solution」

Supplier: Fu Chun Shin(Ningbo)Machinery Manufacture Co,Ltd.

Because of the demand of elegant container package, these package materials not only have to be clean and beautiful but also have to be environmental friendly during producing and after use. FCS integrates the injection molding and automatic techniques as a new turnkey solution, "A-PACK In Mold Labeling Turnkey Solution". Product features: [1]Because of the demand to elegant container package,these package materials not only have to be clean and
FixPerfect™

FixPerfect™

Supplier: KENNAMETAL

FixPerfect is a proprietary platform only to KMT. The positive geometry lowers cutting forces compared to other ISO/ANSI type inserts. Tangential - full length of the insert provides increased rigidity in the pcoket. The bent nail clamp provides easy indexing of the insert. Less chance for the insert to fall. Not a solution for easy machining daily operations. Identify difficult operations. Facing and OD is limited. Not a replacement for CNMG ove
Beyond Blast™

Beyond Blast™

Supplier: KENNAMETAL

An entirely different approach to machining high-temperature alloys. We determined that the most effective way to deliver coolant would be to channel it through the insert - ensuring that it hits exactly where it does the most good. That means, more efficient coolant delivery at a fraction of the cost of high-pressure coolant systems. By precisely controlling coolant application, Beyond BLAST enables you to lower your energy consumption, saving y
HARVI II ™Solid Carbide End Mills

HARVI II ™Solid Carbide End Mills

Supplier: KENNAMETAL

The next generation high-performance end mill, the Harvi II dramatically improves metal removal rates without reducing speed or tool life. The HARVI II provides chatter-free roughing and finishing in side milling and slotting operations. kennametal guarantees productivity improvement when machining: Titanium and other high-temperature alloys Stainless Steel
Hydraulic Forming Machine

Hydraulic Forming Machine

Supplier: Chung Tie Electricity Machinery

Rated Capacity:35 KVA Rated Voitage:220 V Rated Frequency:50/60 Hz Max Input:78/88 KVA Max. Welding Current:16000 A
Gantry Hydraulic Welding Machine (For Grille Board Use Only )

Gantry Hydraulic Welding Machine (For Grille Board Use Only )

Supplier: Chung Tie Electricity Machinery

(1) The buyer should prepare below: 1. Supply voltage of transformer:11KV(11000V) 2. Transformer:1600KVA×1 set 3. No fuse switch:2000Amp 3P×2 sets (Ø3 phase) 4. Cooling water tank:30 tons 5. Cooling pump motor:2HP 6. Cooling water recycle:to be delivered to the cooling water tank from the pool 7. Air pressure supply:7.5 bar max : 6.9m3/min 8. The power cable is enclosed to the inlet power of machine. 9. Hydraulic oil:600L (2)
Column Type Multi-Spot Welding Machine

Column Type Multi-Spot Welding Machine

Supplier: Chung Tie Electricity Machinery

*Rear stage connection- Automatic Net Collection+Flipping Machine *The longitudinal & cross wires must be straighten and pre-cut.
Column Type Multi-Spot Welding Machine

Column Type Multi-Spot Welding Machine

Supplier: Chung Tie Electricity Machinery

*Last Connection Auto Mesh Collecting Machine *The longitudinal & cross wires must be straighten and pre-cut.

Pages