iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

Fully charged with hyperMILL

Source:OPEN MIND Technologies Release Date:2022-07-29 740
Industrial MetalworkingMetalworkingSoftware & CNC System
Add to Favorites
The pandemic has undoubtedly changed the way we work, but for OPEN MIND Technologies, undergoing an extensive online tendering and prove-out process against its competitors was an exciting new challenge.

The pandemic has undoubtedly changed the way we work, but for OPEN MIND Technologies, undergoing an extensive online tendering and prove-out process against its competitors was an exciting new challenge. RE Thompson has ambitious plans for its manufacturing facility and implementing the correct CAM system was seen as a critical decision requiring due diligence for the subcontract manufacturer.

Founded in 1948, RE Thompson has manufactured aerospace components for more than 60 years, diversifying into the electronics and semiconductor, medical, hydrogen, and electric vehicle (EV) sectors in its more recent history. To undertake this diversification, the company has invested over £7m in the last 10 years; an investment that includes opening a second 20,000sq/ft manufacturing facility, installing advanced fibre connectivity and decarbonising infrastructure and new machine tools.

The next step for the Hampshire company is to increase throughput and automation. Unlike most subcontractors, RE Thompson already has impressive factory floor automation with a remarkable 512 pallets on just nine machining centres. The bottleneck for RE Thompson has been the process flow away from the factory floor – primarily CAM programming.

Commenting upon the existing system, Company Owner Michael Thompson says: “The system was falling down on meeting our requirements. We first put the old system in our factory around 30 years ago and over the years it has failed to keep up with technology.”

After selecting OPEN MIND, Mr Thompson reveals: “We looked at five or six systems. It was a very short review, as we quickly narrowed it down to two packages. hyperMILL® is very well supported in the UK, lots of prestigious companies use it and there is local support. However, local support is now increasingly irrelevant, we have been implementing the system with OPEN MIND over Teams during Covid and have yet to meet them in person. We sometimes have people in 6 to 8 locations working from home, so being able to implement hyperMILL® with everyone involved has been fantastic. We found that hyperMILL® had advanced tool path strategies and the overall support was outstanding.”

“The flexibility of hyperMILL® is second to none and they have really honed in on 3 and 5-axis strategies as well as turning – with its reputation in high-end 5-axis machining, we were very surprised by how good the turning package is.”

Looking at particular components manufactured by RE Thompson, Michael says: “hyperMILL® will help us with very small parts where we want to make multiples through to very large semi-conductor chambers. There was one part in the MPI stage that would save us a staggering four days by using hyperMILL®. This saving will be achieved through automating datum settings. These jobs can take weeks to programme, but just in one area, hyperMILL® will make a huge 4-day saving – that is just phenomenal.”

“When you have a lot of datums and ports on a job, we have to set those all individually and markdown in detail what had been set up. With hyperMILL®, it just does it for you. This saving is just in setting the jobs, it doesn’t even account for the possible savings in overall programming and machining. When it comes to machining cycles and retracts, hyperMILL® will naturally follow the shortest tool path – at present, our system retracts the tool all the way out for each process. This will save a huge amount of time on machining cycles.”

On the factory floor, the company produces everything from 1-offs to runs of hundreds of parts. Turning naturally has higher production volumes, but some milling jobs can be up to 500-off a year. New business is from the semi-conductor, maritime autonomous vehicle, aerospace enclosure, hydrogen, and EV industries – all requiring ever-faster turnaround times.

Off-machine savings

Looking at this evolving mix of work, Michael continues: “Where hyperMILL® will make a difference is during the time from order receipt to first-off production. We expect lead times to be hugely reduced. It means our productivity will at least double as we can do the MPI and produce a lot more in a shorter time. We will be investing in 10 seats of hyperMILL®, but I expect this to double and eventually increase fourfold, as we expect our throughput to more than double with hyperMILL®.”

As Head of Sales, Matthew Shaw adds: “The addition of hyperMILL® will be great for the sales team, as we will have more capacity to sell. hyperMILL® will give us greater speed to market, a faster-quoting process and with improved throughput, our lead-times will improve significantly.”

With regards to being more competitive, Michael says: “Sometimes we weren’t competitive machining propeller blades or impellers, as we couldn’t use barrel tools. So, our sales team had trouble selling that facility. With hyperMILL®, we will be able to utilise all of those tools and strategies. The tool library is also very impressive. Having the facility to build a tool library with comprehensive data on machining parameters excites our team, and OPEN MIND has even more features in the pipeline,” concludes Michael.


5 axis machining of large parts at RE Thompson Image source: OPEN MIND


The production floor at RE Thompson with automated cells 1 Image source: OPEN MIND


Add to Favorites
You May Like