iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

Innovative bonding of different resins

Source:Polyplastics Release Date:2022-01-25 2146
ChemicalPlastics & RubberOthersCompoundingRaw Materials & Compounds
Add to Favorites
Polyplastics introduces innovative bonding technology to join different resin materials

Polyplastics Co. Ltd. has introduced an innovative bonding technology that is unlike traditional joining methods such as plastics welding or adhesion.

 

AKI-Lock® has few restrictions on the materials that can be used and forms strong, airtight bonds with combinations of different materials for which bonding had previously been difficult.  It opens the door to a broad range of new product development possibilities. The bonding technology meets the increased market demand for weight reduction to address Sustainable Development Goals (SDGs), reduces the number of parts, and provides stable adhesive strength and longevity.


Polyplastics Aki-Loxk web.jpg

 

 The AKI-Lock® technology uses the glass fibres in glass fibre reinforced resins as a physical anchor for bonding. Glass fibre is made bare by laser irradiation which is completed in a grid pattern. Strong bonds can then be achieved by pouring the resin to be bonded onto these anchors. Since the bond is formed by physical anchors, there is no time limitation from laser treatment until bonding. Masking is unnecessary since specific treatment areas can be identified. There is no need for etching solution to roughen the surface and no waste liquids or materials are produced.

 

Airtightness is greatly enhanced due to three factors: the effect of resin entering and filling the gaps between the glass fibres; deformation in the grooves of the primary material due to the shear flow force of the secondary material; and crimping from mould shrinkage of the secondary material. 

 

AKI-Lock® helps to reduce assembly work and the number of components, thus lowering overall cost. The joining system also helps to reduce environmental impact through the use of dry processes, including the elimination of adhesives.

 

 


Add to Favorites
You May Like