iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

SPE names Automotive Innovation awardees for 2022

Source:SPE Automotive Division Release Date:2022-11-04 1418
ChemicalPlastics & RubberOthersCompoundingRaw Materials & CompoundsMaterials Handling, Measuring & TestingMolds & ComponentsOther Machinery EquipmentPlastics MachinerySemiconductor/Electronic ChipSemiconductor / Electronic Chip
Add to Favorites
SPE® Automotive held awarding ceremony for the 51st SPE Automotive Innovation Awards; first all-composite leaf spring for light truck programs receives Grand Award

SPE Automotive web.jpg


The Automotive Division of the Society of Plastics Engineers (SPE®) announced the winners for its 51st annual Automotive Innovation Awards Gala, the oldest and largest recognition event (established in 1970) in the automotive and plastics industries.  The announcement was made November 2, 2022 during the 51st SPE Automotive Innovation Awards Gala held at the Burton Manor in Livonia, Mich., USA.  The Chassis/Hardware category winner was also this year’s Grand Award winner.  The Grand Award winner is selected from the winners of each of the 10 categories by a panel of Blue Ribbon Judges who are industry experts. This year’s winners are:


GRAND AWARD & CATEGORY WINNER:  Chassis/Hardware

Tension Leaf Spring

OEM Make & Model:  2022 General Motors Co. Chevrolet Silverado & GMC Sierra

Tier Supplier/Processor: Mubea (Muhr und Bender KG)

Material Supplier/Toolmaker:  Multiple / Mubea (Muhr und Bender KG) 

Material /Process:  Epoxy / Prepreg Layup and Compression Molding

The first all-composite leaf spring for light truck programs reduces mass up to 75% vs. all-steel and 58% vs. hybrid steel/composite solutions while doubling durability, eliminating corrosion, improving ride comfort, lowering NVH, and increasing payload. Fiberglass-reinforced epoxy prepreg is used to form a single leaf with a progressive spring rate that eliminates the shackle, shackle bushing, and helper leaves yet passes all OEM test requirements.

 

CATEGORY WINNER:  Additive Manufacturing

Spoiler Closeout Seal

OEM Make & Model:  2022 General Motors Co. Chevrolet Tahoe, Chevrolet Suburban, Cadillac Escalade,

GMC Yukon

Tier Supplier/Processor:  HP Inc. & AMT Ltd. / GKN Additive (Forecast 3D)

Material Supplier/Toolmaker:  BASF Corp. /GKN Additive (Forecast 3D)

Material /Process:  BASF SE Ultrasint TPU01 TPU / HP Multi Jet Fusion 5200 Series

The powder-bed fusion process was used to source, print, process, and install 60,000 TPU spoiler closeout seals to meet 10 weeks of production as a bridge solution while hard tooling was being produced. Innovative vapor polishing and drying processes cleared a bottleneck, halved production time, were used to finish parts, eliminating the need for post-print dyeing. The seals close out gaps on left and right sides of rear spoiler, improving finish and fuel efficiency.

 

CATEGORY WINNER:  Aftermarket & Limited Edition/Specialty Vehicles

Carbon Fiber C-Brace

OEM Make & Model:  2022 Ford Motor Co. Ford Bronco Raptor

Tier Supplier/Processor:  Montaplast of North America

Material Supplier/Toolmaker:  BASF Corp. / Commercial Tool Group

Material /Process:  Ultramid B3WC4 HP CF & GR PA6 / Injection Molding

This customer-visible, Class A C-brace was designed to meet offroad desert durability requirements for convertible versions of the vehicle while boosting torsional stiffness 40% to improve handling and NVH. Weight was reduced 55% vs. aluminum and 85% vs. steel by adopting a sandwich composite approach. Upper and lower shells were injection molded in 35% GR PA6 while a core was injection molded in 20% CF-PA6, then components were bonded with a newly formulated methacrylate adhesive.

 

CATEGORY WINNER:  Body Exterior

Panoramic Sunroof Frame

OEM Make & Model:  2022 Hyundai Motor Group Kia Sorento

Tier Supplier:  Inalfa Roof Systems Korea

Material Supplier:  GS Caltex Corp.

Material /Process:  Hiprene ALG14BF PA6 / Injection Molding

Several novel technologies contributed to this large injection molded LFT-PA6 panoramic sunroof frame. First, flat rather than round glass fibers provided higher dimensional stability and reduced warpage. Second, the twist pultrusion was used to produce LFT pellets whose fiber length exceeds the length of the pellets, again contributing to mechanical improvements. Weight was reduced 51% and part count dropped from 33 to 4 vs. a steel frame. Versus carbon fiber-reinforced LFT, torsional rigidity was 13% higher and breaking force 25% better at 24% lower cost.

 

CATEGORY WINNER:  Body Interior

2nd  Row Seat Backs & Cushions

OEM Make & Model:  2022 Toyota Motor Corp. Toyota Tundra

Tier Supplier/Processor:  Flex-N-Gate Corp. & Adient / Flex-N-Gate Corp. & L&L Products

Material Supplier/Toolmaker:  BASF Corp. / SyBridge Technologies

Material /Process: Ultramid B3ZG7 35% GR-PA6 & Elastocoat 74850 80% GR-PUR PA6 & PU / Pultrusion and Injection Overmolding

This composite seat structure combines a pultruded continuous fiberglass-reinforced PUR reinforcement beam that is injection overmolded with short-glass/PA6 to form the seat frame geometry. By replacing a 60-piece high-strength steel frame structure with a 4-piece molded composite structure, significant crash performance improvements were achieved while both cost and mass targets of 20% reduction were met. Additionally, over 100 welds at 16 weld stations were eliminated, significantly improving quality control, and under-seat storage that wasn’t possible with the previous solution was added.

 

CATEGORY WINNER:  Electric & Autonomous Vehicle Systems

High Voltage Power Distribution System

OEM Make & Model:  2022 Ford F-150 Lightning 

Tier Supplier/Processor:  Aptiv PLC / Yazaki North America, Inc.    

Material Supplier:  DuPont de Nemours, Inc.

Material /Process:  Crastin FR684 & HR5339 PBT / Injection Molding, Silicone Over Molding

This customizable, shielded high-voltage power distribution system permits 7 sets of subassemblies and up to 64 possible configurations from a single tool, providing both flexibility and scalability for future programs. Three different materials are used:  a flame retardant 25% GR-PBT forms the internal assembly and terminal blocks and a silicone seal is overmolded directly onto a 30% GR-PBT cover. A unique shielding system uses stamped connection interfaces that reduce mass by 2/3s vs. cast products while maintaining electromagnetic shielding.

 

CATEGORY WINNER:  Materials

Thermoplastic BEV Thermal Management Solution

OEM Make & Model:  2023 General Motors Co. Cadillac Lyriq

Tier Supplier/Processor:   Cooper Standard Automotive, Inc.

Material Supplier/Toolmaker:  DuPont de Nemours, Inc., Dow Chemical Co., LyondellBasell Industries / Cooper Standard Automotive, Inc.    

Material /Process:   PA6/12, PA66 & PP / Extrusion, Molding, Forming, and Automated Assembly

Two developments provide a lightweight, thermoplastic solution for EV thermal management systems. PlastiCool 2000 multilayer tubing for glycol applications to 120°C provides excellent chemical resistance, 25% better permeation resistance and 60% lower weight than EPDM, and is available in smooth, convoluted, round, and non-round configurations.  Ergo-Lock+ modular VDA connectors are flexible, offer visual and scannable latch verification, reduce insertion forces >30%, The system’s modularity permits hundreds of connector configurations to be produced from a standard set of molded subcomponents at lower total cost.


CATEGORY WINNER:  Powertrain

High Pressure Oil Cooler Gasket Seal

OEM Make & Model:  2022 General Motors Co. Chevrolet Silverado & GMC Sierra

Tier Supplier/Processor:   Uchiyama Marketing & Development America LLC

Material Supplier/Toolmaker:  Uchiyama Marketing & Development America LLC & DuPont de Nemours, Inc. / Uchiyama Marketing & Development America LLC

Material /Process:   UMC V7401 Ethylene Acrylic Elastomeric Plastic / Injection Molding

Oil cooler gaskets are small parts with important sealing functions between oil coolers and oil pumps in demanding engine environments. To eliminate leaks seen with fluorocarbon seals during temperature cycling, a new ethylene acrylic TPV was developed. It offers superior low-temperature sealing and maintains good compression set and controlled oil swelling from -40°-150°C and 14 bars oil pressure. Gasket height also was increased to provide higher contact pressure and better sealing. Costs were reduced 66% and sustainability was increased since the thermoplastic material is recyclable.

 

CATEGORY WINNER:  Process/Assembly/Enabling Technologies

Direct Exposure Laser Welding

OEM Make & Model:  2022 General Motors Co. Chevrolet Blazer

Tier Supplier/Processor:   Magna Lighting

Material Supplier/Toolmaker:  Various / SPM Automation  

Material /Process:   Makrolon LED 2245 000000 PC /  Injection Molding, Laser Welding

Hot-plate welding was replaced with a new process called direct epoxure laser welding to meet customer styling requirements for the light guides. Scanning lasers replace heated tools and can weld opaque lens borders without need for more costly laser-transparent materials. Additonally, clearance between internal components and weld ribs was reduced and ribs can be heated very precisely. The current design’s complex geometries would not have been possible with traditional welding proecsses. Additionally, scrap was reduced 40-50% and energy usage by 85-95%.

 

CATEGORY WINNER:  Sustainability

Reclaimed TPO/Foam System

OEM Make & Model:  2020 General Motors Co. Chevrolet Silverado & GMC Sierra

Tier Supplier/Processor:   Inteva Products, LLC

Material Supplier:  Inteva Products, LLC

Material /Process:   Inteather TGTPO  ECO  TPO /  Extrusion and Repellitizing; Co-Extrusion of TPO Sheets; Vacuum Forming & Injection Graining; Press Lamination; and Assembly 

Thanks to a patented recycling process, PIR bilaminate scrap comprised of TPO skins attached to cross-linked olefin foam is given new life in the same interior trim applications without sacrificing quality or performance. An additive package eliminates/binds/deactivates  reactive residuals and trapped gases from foam. Just on this program, 680,389 kg of TPO resin is reclaimed annually, reducing landfilled scrap 93%, replacing 50% of prime TPO, and lowering CO2 emissions and energy usage 48% each.


CATEGORY WINNER:  VETA (VEHICLE ENGINEERING TEAM AWARD)

The all-electric 2023 Cadillac LYRIQ and a team from General Motors Co. (GM, Detroit) and its suppliers that developed the midsize sport utility vehicle (SUV) have been named the winners of this year’s Vehicle Engineering Team Award (VETA). The VETA award was created by SPE in 2004 to recognize the technical achievements of entire teams — comprised of automotive designers and engineers, tier integrators, materials suppliers, toolmakers, and others — whose work in research, design, engineering, and manufacturing has led to significant integration of polymeric materials on notable vehicles. The vehicle features numerous plastic and composite innovations, many of which were nominated in other categories of SPE’s Automotive Innovation Awards Competition, including the following:


Aftermarket & Limited Edition/Specialty Vehicles Finalist: Electric Vehicle Supply Equipment (EVSE) Charging Accessory

Aftermarket & Limited Edition/Specialty Vehicles Nomination: Ultium Battery Charger

Body Exterior Finalist: Flow-Through Spoiler

Body Exterior Nomination: Front Headlamp System

Body Exterior Nomination: Rear Body-Side Taillamp System

Body Exterior Finalist: Front Enclosed Illuminated Grille

Body Interior Nomination: High-Gloss Piano Black Molded-in-Color (MIC)

Electric & Autonomous Vehicle Systems Nomination: Connection Ring for EV Motors

Electric & Autonomous Vehicle Systems Finalist: High-Damping AC Compressor Bracket

Materials Finalist: Dual Cordset EV Charger Lens

Materials Finalist: Thermal Management Tube & Connector Solution

Materials Nomination: Center Frame Panel

Process/Assembly/Enabling Technology Nomination: Elastic Averaging Vehicle Attachment

Sustainability Nomination: Recycled Resin Blow Molded Ducts


CATEGORY WINNER:  HALL OF FAME AWARD

The first Mold In Color (MIC) weatherable grille, used on the 1987 Volkswagen Golf, has been named the 2022 Hall of Fame Winner.  The industry’s first MIC weatherable grille, made possible with Luran S ® ASA from INEOS STYROLUTION (precolored plastic resins used in the plastic injection molding process so the molded part emerges in a specific color and finish), proved to be a game changer for vehicle front grilles by providing a weatherable, paint free exterior surface. 


To be considered for a Hall of Fame Award, an automotive plastic or composite component must have been in continuous service in some form for at least 15 years and broadly adopted in the automotive industry. This application certainly qualifies as MIC grilles have become the industry standard used by every major OEM for front grilles replacing traditionally painted materials on over 300M exterior parts including grilles, mirrors, pillars, spoilers, fog bezels and more.  Further technology now being developed around MIC ASA includes radar detection covers, lidar equipment, and CHMSL (Center High Mounted Stop Lamp) bezels.  The automotive market for MIC ASA has now grown to over 100M pounds globally.


The companies involved in developing the first MIC weatherable grille application include: OEM – Volkswagen Group; Molder/Processor – Volkswagen Group; and Material Supplier – INEOS STYROLUTION. Representatives from these companies accepted the SPE Automotive Hall of Fame Award, on behalf of the original team that worked to develop the technology.


CATEGORY WINNER:  LIFETIME ACHIEVEMENT AWARD

Probir Guha, who retired in 2021 after an illustrious career in the automotive composites industry (mostly with the Budd Company, Continental Structural Plastics and Coats), has been named the 2022 Lifetime Achievement Award winner by the Automotive Division of the Society of Plastics Engineers (SPE®).   Over his almost 50 year career, he led key innovations in the field reflected by his many global patents (179 patents issued & pending as of June 19, 2022); participated in industry technical conferences presenting several papers and holding committee leadership positions; was recognized with an industry award for innovation, research and advancements with the 2019 Pioneer Award by The American Composites Manufacturers Association (ACMA); and has edited a book where he coordinated the efforts of industry and academic experts to share concepts of how to further the composites industry. 

 

Guha has recently formed a technology consulting company, Composites Innovations Inc., bringing the adoption of lightweight materials across multiple applications focusing on sustainability and recyclability, continuous hybrid fibers, smart composite technologies and artificial intelligence in products for continuous improvement.


Add to Favorites
You May Like