iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

Driving innovation in the automotive sector

Source:Ringier Release Date:2012-01-16 791
Plastics & RubberSemiconductor/Electronic ChipSemiconductor / Electronic Chip
Add to Favorites

The winners of the 2011 SPE Automotive Innovation Awards

Two automotive applications moulded from SABIC's Innovative Plastics' broad portfolio of thermoplastic materials received top honours at the 2011 Society of Plastics Engineers (SPE) Automotive Innovation Awards competition - including the coveted Hall of Fame award and the overall Grand Award. In addition, five other applications were recognised as finalists in other categories. These innovative components - ranging from the world's first all-plastic door module and a lower leg protection system made with sustainable material to a lighterweight instrument panel - demonstrate the exceptional scope and diversity of SABIC's thermoplastic portfolio. The awards were presented on 9 November 2011 at the 41st annual SPE Automotive Innovation Awards Gala in Livonia, Michigan.

"Innovative ways to produce parts on cars are an important factor for OEMs to maintain a strong competitive position in the automotive industry and effectively respond to global trends and challenges," said Gregory A. Adams, vice president, Automotive, Innovative Plastics.

The first all-plastic structural doorhardware module, also known as the SuperPlug, from Inteva Products, LLC (formerly Delphi Interior & Lighting Systems), was the Hall of Fame winner. It replaced 40 separate metal parts with a single gas-assisted injection-moulded part made with SABIC's Xenoy 30% glass-filled polycarbonate/polybutylene terephthalate (PC/PBT) resin. The prestigious Hall of Fame award acknowledges the major contribution Xenoy resin has made to the global automotive industry. The door module concept began with Xenoy PC/PBT resin and has been widely adapted in the industry as the material of choice for this application.

The SuperPlug door module reduces costs by 10%, reduces weight by 3.3 lb per door/13.2 lb per vehicle and simplifies assembly by allowing the module to be placed within the door on the assembly line. This door module programme paved the way for door modules across the industry.

The overall Grand Award winner - also the Process/Assembly/Enabling Technologies category award winner - is the Ford Escape/Ford Kuga instrument panel made by Faurecia using Trexel MuCell microcellular foam injection moulding technology and SABIC STAMAX 20% long glass fibre (LGF) polypropylene (PP). This application reduces weight by 1 lb, reduces cycle time by 15% and lowers cost by about $3 per vehicle compared to an instrument panel moulded with a standard injection moulding process. The MuCell process uses less resin and energy than traditional injection moulding, helping to increase the sustainability of the instrument panel.

The Ford C-Max lower leg protector, a finalist this year in the Safety category, features an undertray with uniquely designed spring-back action to help reduce knee bending and resulting injury during an impact with a pedestrian. The undertray is moulded by Faurecia from SABIC's Xenoy iQ* PC/PBT-based resin. This approach also reduces mass by providing tuned stiffness without the need for additional steel spoiler supports.

Sustainable Xenoy iQ resin is also used to mould the upper load-path energy absorber for the Range Rover Evoque sport utility vehicle, which was also a finalist this year in the Safety category. This application is a one-piece plastic fascia reinforcement with pedestrian safety functionality and is designed to meet the challenges of lower-leg impact protection in a vehicle with a higher bumper. This part, moulded by Magna International, integrates five functions, including air intake, headlamp support and grille attachments.

To reduce weight, Sanyo Electric moulds the battery module for the Volkswagen Touareg hybrid – a finalist in the Powertrain category – from SABIC's Noryl modified polyphenylene ether (PPE) reAir Jordan 1

Add to Favorites
You May Like