Access
iConnectHub
Login/Register
Supplier Login
| Phase A | |
| Deionized water | 62.40 |
| Disodium EDTA (Ruger Chemical) | 0.10 |
| Veegum HV (Vanderbilt) (Magnesium aluminum silicate | 1.00 |
| Phase B | |
| Xanthan gum (Ruger Chemical) | 0.50 |
| Liponic EG-1 (Lipo Chemicals) (Glycereth-26) | 4.00 |
| Phase C | |
| Lipomulse 165 (Lipo Chemicals) (Glyceryl stearate (and)tPEG-100 stearate) | 4.00 |
| Lipo GMS 450 VEG (Glyceryl stearate) | 2.00 |
| Liponate GC (Lipo Chemicals) (Caprylic/capric triglyceride) | 8.00 |
| Lipobutter Refined Shea (Lipo Chemicals) t(Butyrospermum parkii (Shea butter)) | 5.00 |
| Lipocol SC (Lipo Chemicals) (Cetearyl alcohol) | 2.00 |
| Phase D | |
| Kaolin (Ruger Chemical) | 10.00 |
| Phase E | |
| Vedaplex 121 NF (Lipo (SIR Biotech India)) (Limon (lemon) peel powder (and) Citrus aurantium dulcis (orange) peel powder (and) withania somnifera root extract) | 1.00 |
| Preservative | q.s. |
| Procedure | |
| In main vessel mix phase A with medium speed propeller stirring. Heat to 80u00b0C. Hold 30 minutes. Slowly add premixed phase B while mixing at temperature. Hold 30 minutes. Start heating phase C while mixing. At 80u00b0C add C to main vessel while mixing. Add phase D to main vessel. Start cooling while mixing. When temperature approaches 40u00b0C slowly add phase E while mixing. Mix until homogeneous, shutdown when temperature reaches 32u00b0C. | |
| Properties | |
| pH: 5.50-6.50; Viscosit: TFAir Jordan XVIII 18 Add to Favorites Share to：     
You May Like
| |
Facial Mask
Source：Happi Release Date：2013-06-30 288
Personal Care
Add to Favorites
Facial Mask with Vedaplex 121 NF No. 1683 from Lipo