Arabplast 2013 Exhibitors: Europe

The TVEplus? technology from EREMA enables processors to turn even materials which are difficult to process into highquality pellets – in a single step and through efficient filtration, melt homogenisation and high-performance degassing. Another product, VACUREMA? is one of the world's most successful PET recycling technologies. The new system concept for VACUREMA? Prime technology is a compact and space-saving all-in-one solution and the company’s answer to the strongly fluctuating rPET market. Thanks to this new concept, both decontaminated, pre-dried and crystallised rPET flakes and high-quality, melt-filtered rPET pellets can be produced. Both products are suitable for direct food contact and surpass all minimum requirements in terms of purity and quality. Another product, COREMA?: is a recycling system that combines the benefits of recycling and compounding for the first time in one system and makes it possible to produce customised plastic compounds from inexpensive recycling raw material in a single processing step.

EREMA Engineering Recycling Maschinen und Anlagen Ges. m.b.H.
Tel.: +43 (0)732/3190-391
E-mail: g.breuer@erema.at
Website: www.erema.at

Herbold: Washing and separation plant
A newly developed washing and separation plant features a granulator with a screen insert, working with a great amount of water, size-reduces the casing parts that have already coarsely been shredded in upstream production steps. The intensive mechanic strain during the grinding step cleans the material and makes sure no dirt particles adhere to it. During the wet separation, the specifically heavier PP fraction is separated from the lighter PP fraction. Once the material has been dried, the specifically lighter foreign bodies are separated from the ground material: among these are wooden parts, fibres, films and the PP fraction. The plant has been designed for a throughput of 1,200 kilogram per hour. The total connected load is 145 kW (thermal drying included). The homogeneous PP fraction accordingly produced is free from dirt and foreign bodies. Therefore, the material is appropriate for the production of high-quality injection moulding parts such as covers for battery casings.

Herbold Meckesheim GmbH
Tel.: +49 6226 932-0
Fax: +49 6226/932-495
E-mail: herbold@herbold.com
Website: www.herbold.com

Leister: Air heaters for PV wafer production
Besides wind and water, photovoltaics (PV), is becoming ever more important among renewable energies. At the Norwegian machinery and plant manufacturer Tronrud Engineering, air heaters of the LHS product line from Leister are used for sensitive drying processes in the wafer processing. The Wafer Inspection Line (WIL) carefully performs all steps from the sawn block through to the packed wafer. It achieves an availability of more than 95 percent as well as a fracture rate of under 0.5 percent, – all within a cycle time of once second per wafer. These impressive values can also be attained thanks to the drying technology used. After the obligatory fine washing of the individual wafers, the moisture is removed without a trace in a drying tunnel. Leister’s line of LHS air heaters is ideally suited for such demanding tasks. Heating powers from 550 Watt to 32 Kilowatt are covered with the various models offered within the LHS line (Leister Heat Sources). The LHS line is available in all power classes in the CLASSIC, PREMIUM and SYSTEM models. These heaters are primarily distinguished by theiAir Jordan XX9 29 Shoes