Access
Login/Register
Supplier Login
Ingredients % Weight
Phase A Homosalate [Homosalate]
7.00 Caprylic/capric triglyceride
3.00 Tocopheryl acetate
0.20 SolaStay S1 (HallStar) (Ethylhexyl methoxycrylene)
2.00 SolaStay P1 (HallStar) (Polyester-25)
3.00 HallBrite BHB (HallStar) (Butyloctyl salicylate)
5.00
Phase B Iron Oxides (yellow) (CI 77492), Triethoxycaprylylsilane
1.30 Iron Oxides (red) (CI 77491), Triethoxycaprylylsilane
0.42 Iron Oxides (black) (CI 77499), Triethoxycaprylylsilane
0.13 Titanium Dioxide (CI 77891), Triethoxycaprylylsilane
5.00
Phase C Butyl methoxydibenzoylmethane [Avobenzone]
3.00
Phase D VP/Eicosene copolymer
1.00 HallStar GMS Pure (HallStar) (Glyceryl stearate)
1.45 HallStar PEG 4400 MS (HallStar) (PEG-100 stearate)
1.30 Potassium cetyl phosphate, hydrogenated palm glycerides
1.20
Phase E Styrene/acrylates copolymer (hollow spherical, 325 nm)
2.00
Phase F Water (Aqua) (deionized)
54.75 Disodium EDTA
0.05 Xanthan Gum (pharma grade)
0.20
Phase G Phenoxyethanol, caprylyl glycol, chlorphenesin
1.00 Glycerin
3.00
Phase H Acrylamide/sodium acryloyldimethyltaurate copolymer, Isohexadecane, Polysorbate 80
1.50 Cyclopentasiloxane, Cyclohexasiloxane
2.00 Eurol BT (HallStar Italia) (Olea Europaea (Olive) leaf extract, water)
0.50
Procedure To a secondary vessel, add phase A and start mixing. Slowly add phase B to phase A with continued mixing. Heat AB to 85°C. With mixing, add phase C to phase AB, then add phase D to ABC. Before combining the oil and water phases, add phase E to ABCD. Mix well. To the main vessel, add the water of phase F, start mixing, add the Disodium EDTA, then add the xanthan gum. Heat this phase to 80°C. When the contents of both vessels are homogeneous and at their designated temperatures, slowly add ABCDE to F with prop mixing. Homogenize for 3 minutes and resume prop mixing. Start cooling and when batch is below 45°C, then add premix of phase G with mixing. Add phase H with mixing. Replace any water lost to evaporation and mix batch until smooth and at desired filling temperature.
Properties (25°C): Appearance—Beige smooth lotion; Viscosity 20 rpm, Brk, RVDV II+, T-D, after 24h at room temperature, mPa?s): 5400 – 9000; pH: 5.5-6.5.
| More Information | |
| (Formulation number: JZ7-133) The HallStar Company Tel:877-427-4255 (International), 312-385-4494 Fax: 330-929-3616 Email: customerservice@hallstar.com Website: hallstar.com |