TaipeiPlas 2012 - Exhibitors Showcase (Auxiliary Equipment and Parts)

TC5200 multi-cavity hot runner controller
The TC5200 multi-cavity hot runner controller features a 12~60 point temperature combination control and multi-machine networking. Maintenance operations can be simplified with its modularised device design and requirement-based configuration. The GUI-based user interface, along with its adjustable perspective angle, is easy for fast adoption in multi-points control. The RS485 communication function enables the setting up of multiple controls at once to simplify the required operations.

ARICO Technology Co., Ltd.
Tel: +886-2 2910 1266; Fax: +886-2 2915 9434
E-mail: info@arico.com.tw
Website: www.arico.com.tw
Booth: J1328

HMI, PID temperature controller
CONCH is a leading manufacturer of Human Machine Interface (HMI) Controller, PID Temperature Controller, Solid State Relay (SSR), SCR Power Regulator, Microprocess Control Panel Meter, Photoelectric Sensor, Proximity Switch, Counter, Timer and Length Sensors.

CONCH Electronic Co., Ltd.
Tel: +886-6 384 2111; Fax: +886-6 384 0855
E-mail: conchltd@ms24.hinet.net
Website: www.conch.com.tw
Booth: N0810a

Quick-mould change system
The quick-mould change system is intended for injection-moulding machine and dye-casting machine. It adopts four independent circuits of cross-clamping system to fix the mould. Each hydraulic circuit allows for long-term pressure maintenance. The pressure is not affected by power failure or reduction in air pressure. The system shortens mould-changing time and ensures safety in operation.

Sandsun Precision Machinery Co., Ltd.
Tel: +886-4 853 6688; Fax: +886-4 853 6699
E-mail: sa3@sandsun.com.tw
Website: www.sandsun.com.tw
Booth: M1008

Mould and hot runner system
Mo Chyi specialises in researching and manufacturing of hot runner system plastic injection mould, insert labelling mould, and plastic food container mould. The system has short cycle time (shortest time up to 3.2 sec with advanced blowing technology), and guarantees high productivity, and good stability. It is most suitable for lightweight and extra-thin (thinnest up to 0.3mm) disposable products.

Mo Chyi Enterprise Co., Ltd.
Tel: +886-4 735 4681; Fax: +886-4 735 4584
E-mail: lcn11111@ms23.hinet.net
Website: www.food-mold.com
Booth: L431 & L432

Blown film die heads
Horng Tair has engaged in the manufacture of multiple-layer, along with blown-film die heads in various colours for 20 years. New products include 3-layer ABA adjustable die head which can save 3% material usage and achieve energy saving. The design can be customised with die heads diameter ranging from 30mm to 1500mm and width of maximum 5000mm. LLDPE, LDPE, HDPE and LDPE can beNike Air Max 2017