Welcome To Industrysourcing
      
Home >News>News Details

Heavyweight in lightweight construction: steel-aluminium laser welding for shipbuilding

Source:Int'l Metalworking News for Asia     Date:2021-08-17
Share to Wechat


Lightweight construction with mixed steel-aluminium compounds is already a major topic in the automotive industry. In order to reduce fuel consumption and carbon dioxide emissions in shipping industry, such mixed compounds are also being used increasingly in shipbuilding. With these, however, completely different material thicknesses come to bear. In the joint research project LaSAAS, the Laser Zentrum Hannover e.V. (LZH) has developed a laser-based joining process for thick mixed joints together with its partners.


 Laser_Welding.jpg

Laser welding of steel on aluminium with high sheet thicknesses for shipbuilding. (Photo: LZH)


Ship's hulls made of steel and aluminium alloy superstructures are primarily used in yacht construction. Such material combinations reduce the overall weight and lower the centre of gravity of the ship, thus stabilizing it. Via an adapter, the two different metals are joined securely and with a high mechanical load capacity. This adapter is conventionally manufactured by explosive plating, a complex and costly joining process. In the joint research project LaSAAS, the LZH and nine partners have developed a laser welding process with integrated welding depth control in order to manufacture such adapters quickly and flexibly.

 

Thus, new design options for these connection elements can be realised. Under static load in the tensile shear test, the adapter pieces manufactured in this way achieve similar strength values like the explosion-proofed adapters. For example, the yield strength of the welded aluminium alloy exceeded by 52 percent. Now, in future research activities, it is important not only to achieve a high load capacity, but also a high deformability of the adapter pieces.

 

Constant seam quality through welding depth control
The welding depth control is supposed to ensure the consistent quality of the welding seam even with sheet thickness jumps. Two approaches were investigated in the project: Both the analysis of the spectral process emission and the short-coherence interferometry can both be reliably used for process control. In the process, the welding depth is actively controlled via the laser beam power.

 

A controlled process for the laser beam welding of this compound is important in order to minimise the amount of intermetallic phases between the steel and the aluminium alloy. A too large phase leads to embrittlement and increases the tendency to crack. Under stress, a premature failure of the connections may occur. Only with the aid of the welding depth control mixed joints can be welded with relatively high seam quality - especially with varying thicknesses of sheet metal.

 

The joint research project, "Laser beam welding of steel to aluminium for use in shipbuilding" (LaSAAS), was funded by the Federal Ministry for Economic Affairs and Energy (BMWi) under the technical supervision of Forschungszentrum Jülich GmbH (PtJ).

 

Laser Zentrum Hannover e.V. (LZH)

As an independent, non-profit research institute, the Laser Zentrum Hannover e.V. (LZH) stands for innovative research, development and consulting. The LZH is supported by the Niedersachsen Ministry of Economic Affairs, Employment, Transport, and Digitalisation and is dedicated to the selfless promotion of applied research in the field of photonics and laser technology. Founded in 1986, over 170 employees are now working for the LZH.

 

The focus of the LZH lies on the fields of optical components and systems, optical production technologies, and biomedical photonics. Interdisciplinary cooperation between natural scientists and mechanical engineers makes innovative approaches to challenges from the most different areas possible: from the development of components for specific laser systems to process developments for the most diverse laser applications, for example for medical technology or lightweight construction in the automotive sector. Eighteen spin off companies have emerged from the LZH up to now. Thus, the LZH has created a strong transfer between fundamental sciences, application oriented research, and industry.


LZH.jpg

A laser-beam-welded adapter made of steel and aluminium for the use in shipbuilding. (Photo: LZH)


LZH_2.jpg

The laser welding process for steel on aluminium that was developed by the LZH achieves a high quality with low irregularities at high sheet thicknesses. (Photo: LZH)

0Comments

Back To The Top