Time Of Establishment：1970-01-01
1.With the "C" frame: the way is clear! Thanks to total access from the side, these are particularly well suited to the production of: a.sealing profiles junction and corner molding b.small engineering parts in an automated environment. 2.Two-stage closing: simplicity for small runs. These presses, with a closing force of 25 to 100 tons, are designed for small production runs not requiring the use of demolding kits. The rapid closing speed is achieved by two closing cylinders and clamping by a direct cylinder that ensures constant working height. 3.Three-stage closing: long production run reliability. With the 160 to 800 ton presses and over (1200 and 2000 tons), rapid closing is ensured by two hydraulic cylinders. A pivoting indexing block inserts itself between the moving traverse and the mold adjusting screw. A cylinder incorporated into the fixed traverse opposite the injection unit provides the clamping function. Three-stage closing ensures a constant opening stroke whatever the thickness of the mould. 4. Mould Closing: Quality. The traverse castings of the frame have been specifically designed for each type of press to provide excellent rigidity. Deformation of the plates under load is less than 0.10 mm. This special REP feature, combined with the shoulderless columns, ensures constant parallelism as well as exceptional tooling durability, and guarantees the dimensional quality of the parts.
Copyright (c) Ringier Trade.com. Copyright (c) Ringier Trade Media Ltd. (c) 2021.
All rights reserved. Reproduction in whole or part in any form or medium without express written permission is not allowed.
Ringier Trade .com (c) Ringier Trade Media Ltd., accept no responsibility or liability for any information provided by any third party on this website.