Extruder barrel screw specifications: Diameter: φ15-φ300 Length-diameter ratio: L/D=15-46 Injection molding machine melt glue tubing (barrel) screw specifications: Mould clamp force: 250t-3200t Injection amount: 30g-2500g Technology index: Nitriding layer: 0.5-0.8mm Nitriding hardness: ＞950HV Nitriding brittleness: ＜level 2 Linearity: 0.015mm/m Surface roughness: Rao0.4/m Product classification: Aiming at different plastic products the screw can be chosen: general type, pin type, barrier type, separation type, and gas-exhausting type, etc.
Copyright (c) Ringier Trade.com. Copyright (c) Ringier Trade Media Ltd. (c) 2023.
All rights reserved. Reproduction in whole or part in any form or medium without express written permission is not allowed.
Ringier Trade .com (c) Ringier Trade Media Ltd., accept no responsibility or liability for any information provided by any third party on this website.