Welcome To Industrysourcing
      

Basic Information

Company Name:

Time Of Establishment:1970-01-01

Business Model:

Area:

Main Products

Product Categories

Contact Us

Contact Person:

Tel:

Email:

EDM Drilling Machine / Electric discharge machines

ProductCategory: Origin: Brand: Minimum order:1 Type of payment: Delivery Period:

ProductDescription

Electrode clamping range:0.1mm~6.5mm 1. The machine is professionally designed for harden alloy & powder metallurgy steel, as well as for small or deep hole drill that normal drilling machine are unable to perform. 2. Cutting speed up to 2 times then CASTEK's SD series. 3. Initial hole drill for Wire Cut EDM. ( Start hole) 4. Drilling capacity from 0.1mm to 6.5mm and with proportion of drilling depth & diameter as large as 200:1, electrode size large than 0.5mm. 5. Also suitable for curved surface, globe surface and irregular surface drilling. 6. New High Current Density (HCD) power technology, cutting speed almost one time fast than SD series. 7. Easy to obtain straightness and roundness of hole. 8. Use De-ionized water or tap water, easy to get it and cheaper. 9. EDM parameter selection by size, easy operate. 10. Full digital control panel is easy to operate, and management. 11. Fine sparking loop and control feed back, to stable drilling speed, and even very small size of electrode may drilling well. 12. Special carbide machining circuit and device, to maximize drilling speed and hole quality , with non-cobalt melt, and very small area of over burn. (Carbide Machining Circuit). For example: Carbide CD650, 76mm thick, to use 0.5mm copper electrode drill, it take about 15 Mins to break through, and hole size both top and bottom less than 0.58mm. 1. The machine is professionally designed for harden alloy & powder metallurgy steel, as well as for small or deep hole drill that normal drilling machine are unable to perform. 2. Cutting speed up to 2 times then CASTEK's SD series. 3. Initial hole drill for Wire Cut EDM. ( Start hole) 4. Drilling capacity from 0.1mm to 6.5mm and with proportion of drilling depth & diameter as large as 200:1, electrode size large than 0.5mm. 5. Also suitable for curved surface, globe surface and irregular surface drilling. 6. New High Current Density (HCD) power technology, cutting speed almost one time fast than SD series. 7. Easy to obtain straightness and roundness of hole. 8. Use De-ionized water or tap water, easy to get it and cheaper. 9. Use De-ionized water or tap water, easy to get it and cheaper. 10. Full digital control panel is easy to operate, and management. 11. Fine sparking loop and control feed back, to stable drilling speed, and even very small size of electrode may drilling well. 12. Fine sparking loop and control feed back, to stable drilling speed, and even very small size of electrode may drilling well. For example: Carbide CD650, 76mm thick, to use 0.5mm copper electrode drill, it take about 15 Mins to break through, and hole size both top and bottom less than 0.58mm.

Share to Wechat

Related Product

Back To The Top    

Product inquiry

Name:
Tel:
Email:
Company:
Industry:
Inquiry content: