Time Of Establishment：1970-01-01
Designed for high speed precision machining requirements, quick 3 axes acceleration/deceleration, the highest feed rate is 32 m/min. 3-layer T shape machine bed ensures the best rigidity and stability. Double column & beam are made of single piece construction casting and assembled vertically; box shape beam supporting the 2 linear guides on two different sections gives the best structural rigidity. Non-counter balance on Z axis allows high speed and quick feed response. Fixed end of Z-axis ball screw located on the bottom of the saddle, it balances the spindle and structural thermal deformation and improves positioning accuracy. 15,000-36000 rpm spindles are available to meet various machining requirements. High precision roller type linear guides installed on all 3 axes. Absolute encoder motors are used in 3朼xis feeding. X/Y/Z-axis ball screws and linear guides are lubricated by centralized auto lubrication system (Oil type, except for graphite machining center the centralized auto lubrication system is grease lubrication). Oil and coolant separating is designed in machine bed, and coolant tank with oil skimmer improves service life of coolant. Fully enclosed splash guard. Various controller, spindle, ATC units and accessories are available. Oil mist device and oil mist collector are optional. Graphite collector device used for dry cutting is optional.
Copyright (c) Ringier Trade.com. Copyright (c) Ringier Trade Media Ltd. (c) 2021.
All rights reserved. Reproduction in whole or part in any form or medium without express written permission is not allowed.
Ringier Trade .com (c) Ringier Trade Media Ltd., accept no responsibility or liability for any information provided by any third party on this website.